Juniper EX9200 Series

gratuitous-arp-count number;
hold-down-interval seconds;
interface-monitor {
interface-name weight number;
}
ip-monitoring {
family {
inet {
ipv4-address {
interface rethindex.logical-unit-number secondary-ip-address ipv4-address;
weight number;
}
}
}
global-threshold number;
global-weight number;
retry-count count;
retry-interval interval;
}
node node-number priority priority-number;
preempt;
}
config-button {
no-clear;
no-rescue;
}
container-devices {
device-count number;
}
craft-lockout;
disable-power-management;
disk-partition partition-name (/config |/var) {
level (full | high) {
free-space threshold-value (mb | percent);
}
}
enhanced-policer;
extended-statistics;
fabric {
degraded {
action-fpc-restart-disable;
degraded-fabric-detection-enable
degraded-fpc-bad-plane-threshold number-bad-planes;
}
redundancy-mode (increased-bandwidth | redundant);
}
filter;
fpc slot-number {
... the fpc subhierarchy appears after the main [edit chassis] hierarchy ...
}
fpc-feb-connectivity {
fpc slot-number feb (slot-number | none);
}
fpc-resync;
fru-poweron-sequence sequence;
lcc index {
23Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Configuration Statements