CHAPTER 2
Deploying a Virtual Appliance
•
Deploying a Junos Space Virtual Appliance on page 13
Deploying a Junos Space Virtual Appliance
You can use the VMWare OVF Tool to deploy one or more Junos Space virtual appliances
on a VMware ESX or ESXi host server.
The Junos Space Virtual Appliance requires a VMware ESX server, version 3.5 or later, or
VMware ESXi server, version 4.0 or later that can support a virtual machine with the
following configuration:
•
64-bit quad processor with at least 2.66 GHz
•
8 GB memory
NOTE: The ESX or ESXi host server must be configured to support the
creation and operation of a virtual machine allocated with 8 GB memory.
If the host server does not support this requirement, you will not be able
to successfully deploy the Junos Space Virtual Appliance. The Junos Space
OVF file is initially configured with 4 GB memory; however, during the
configuration of the Virtual Appliance you must increase memory to 8 GB.
•
One RJ-45 10/100/1000 Network Interface Connector
•
45 GB hard disk (5 GB initial disk resources + 40 GB disk resources to be added)
NOTE: The ESX or ESXi host server must include an Enterprise edition license,
which might not be installed on host server by default. The Enterprise edition
license provides the privileges that are required for adding disk resources to
the Junos Space Virtual Appliance.
13Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...