CHAPTER 3
Configuring a Virtual Appliance
•
Configuring Basic Settings for a Junos Space Virtual Appliance on page 19
•
Changing Network and System Settings for a Junos Space Virtual Appliance on page 25
Configuring Basic Settings for a Junos Space Virtual Appliance
After you deploy a Junos Space Virtual Appliance to a VMware ESX or ESXi server, you
must enter basic network and machine information to make your Junos Space Virtual
Appliance accessible to the network. You must also increase the virtual appliance drive
space.
To configure a deployed Junos Space Virtual Appliance, the VMware vSphere client must
be connected to the VMware ESX or ESXi server on which the virtual appliance is running.
This topic includes the following tasks:
•
Configuring an Appliance that is the First Node in a Cluster or that Will Not Be Added
to an Existing Cluster on page 19
•
Configuring an Appliance to Add to an Existing Cluster on page 23
Configuring an Appliance that is the First Node in a Cluster or that Will Not Be Added to an
Existing Cluster
To configure the settings of a Junos Space appliance that is the first node in a cluster or
that will not be added to an existing cluster:
1. Power on the Junos Space Virtual Appliance:
a. From the VMware vSphere client, right-click on the Junos Space Virtual Appliance
and select Power > Power On from the drop-down menu.
b. Select the Console tab.
The VMware vSphere Client console screen displays the Junos Space login prompt.
2. At the Junos Space login prompt, enter admin as your default login name and press
Enter.
3. Enter abc123 as your default password and press Enter.
Junos Space prompts you to change your default password.
19Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...