The Location option should remain at the default setting Store with the virtual
machine.
9. Click Next.
The Advanced Options window is displayed.
10. Leave the default settings unchanged, and click Next.
The Ready to Complete window is displayed.
11. Review your selected options, and click Finish.
The Virtual Machine Properties window displays the new virtual disk in the Hardware
list.
12. Click OK to create the new virtual disk.
A status bar shows progress at the bottom of the window.
NOTE: After the new virtual disk is created, the Junos Space node must
be scanned to detect the additional disk space that you added. To start
the scan for additional disk space, you select the Expand VM Drive Size
option in the Junos Space Settings Menu, immediately after you configure
basic settings for your Junos Space Virtual Appliance.
The next step is to configure basic settings for your deployed Junos Space Virtual
Appliance. To configure basic settings for the appliance, you access the console in the
VMware vSphere client.
To deploy another Junos Space Virtual Appliance, you complete the all the preceding
steps (and configure basic settings) for each Junos Space Virtual Appliance that you
want to create.
Copyright © 2010, Juniper Networks, Inc.18
Junos Space Virtual Appliance Installation Guide
To Next Page
Loading...