5. Right-click the Junos Space Virtual Appliance icon, and select Edit Settings from the
drop down menu.
The Virtual Machine Properties dialog box appears.
6. Select the Hardware tab.
7. Select Memory.
8. Increase memory to 8192 MB.
9. From the Hardware tab, and select CPUs.
10. Set the value for Number of virtual processors field to 4.
11. Click OK.
The number of virtual processors (CPU) for your Junos Space Virtual Appliance is
increased to 4.
Adding Disk Resources for a Junos Space Virtual Appliance
The distributed Junos Space Virtual Appliance files are created with 5 GB of disk space.
To support Junos Space functionality, after deploying the Junos Space Virtual Appliance
to the VMware ESX server, you must add disk resources for the Junos Space Virtual
Appliance.
NOTE: You must add a disk resource to increase disk space for a Junos Space
Virtual Appliance. You cannot resize the existing disk by assigning a new size.
To add disk resources for the Junos Space Virtual Appliance:
1. In the VMware vSphere client, right-click the Junos Space Virtual Appliance icon, and
select Power > Power On. The Junos Space Virtual Appliance must be powered on
to add disk resources.
2. Right-click the Junos Space Virtual Appliance icon, and select Edit Settings from the
drop down menu.
The Virtual Machine Properties window is displayed.
3. Select the Hardware tab, and click Add.
The Select Device Type window is displayed.
4. Select Hard Disk.
5. Click Next.
The Select a Disk window appears.
6. Select Create a new Virtual disk.
7. Click Next.
The Create Disk window appears.
8. Set the Disk Size field to 40 GB.
17Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Deploying a Virtual Appliance
To Next Page
Loading...