13. Confirm that the information in the Settings Summary is correct:
•
If all summary information is correct, enter A to apply the settings.
•
If any summary information is not correct, enter C to change the settings.
When you enter C, you will be prompted to reenter all the basic configuration
information that you have configured up to this point.
When you enter A to apply the settings, the Junos Space Settings Menu is displayed,
as shown in the following example.
Junos Space Settings Menu
1> Change Password
2> Set Routing
3> Set DNS Servers
4> Change Time Options
5> Retrieve Logs
6>Expand VM Drive Size
7>Security
8> (Debug) run shell
Q> Quit
R> Redraw Menu
Choice [1-8,QR]:
14. Enter 6 to Expand VM drive size.
Junos Space displays the prompt to expand VM (virtual appliance) drive size, as shown
in the following example.
Choice [1-8,QR]: 6
This process will scan this node for additional drive space that you may have added.
During this process, performance on this node may be significantly slowed.
Continue? [y/n]
Copyright © 2010, Juniper Networks, Inc.24
Junos Space Virtual Appliance Installation Guide
To Next Page
Loading...