3. A passcode screen is shown.
a. If the device has an assigned passcode, enter the
number and press Next.
b. If a passcode is required but has not been assigned,
enter an alphanumeric passcode between 1 and 16
characters in length. Press Next.
c. If a passcode is not required, leave the box blank and
press Next.
Note: If you are unsure whether the device requires a
passcode and whether one has already been assigned to the
device, see the user documentation that came with the device.
4. This process should connect you to the desired device.
5. Bluetooth seings can be adjusted as needed.
Ch 4 Bluetooth Wireless Communication 47
To Next Page
Loading...
