Juniper Mesa - Connecting to a Wi-Fi Network

52 Mesa Rugged Notepad Owner’s Manual
Wi-Fi Wireless Communication
The Mesa has built-in Wi-Fi wireless communication to connect
to the Internet or a work network
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of an access point to
make a connection. To actively look for a network connection
complete the following steps:
1. From the Home screen, turn Wi-Fi on by tapping the Wi-Fi
gadget
. The Mesa automatically starts scanning the area
for available Wi-Fi networks. (If this gadget is not on the
Home screen, go to Geing Started and select Set up Wi-Fi or
go to Start > Seings > Connections > Wireless Manager.)
2. Tap-hold the Wi-Fi Icon to go to the Wi-Fi control panel.