Juniper Mesa - Page 53

When the Mesa completes the scan, a list of available
networks and their strengths appears on the Wi-Fi Wireless
screen.
3. Tap on the network you want to connect to. If you want to
add a new network, select Add New from the top of the list.
4. Conguration and authentication set up screens are shown.
Depending on the network you are connecting to, you may
need to make some selections from pull down lists and
enter information like a passkey. Some information may
not be required or will appear automatically. When you are
nished with the set up screens, press Finish.
5. Select Network Adapters from the horizontal scrolling
conguration options. For connection options, select The
Internet or Work (for oce networks). Other seings can be
modied if necessary.
6. If you selected The Internet, you can open Internet Explorer
and begin using the internet.
Ch 5 Wi-Fi Wireless Communication 53