Table 39: AC Power Cord Specifications for MX10008 Routers (continued)
Graphic
Juniper Model
NumberPlug Standards
Electrical
SpecificationsCountry/Region
Switzerland CBL-EX-PWR-C19-SZSEV 5934/2 Type
23G
250 VAC, 16 A,
50 Hz
CBL-EX-PWR-C19-UKBS 1363/A Type
BS89/13
250 VAC, 13 A,
50 Hz
United Kingdom
CAUTION: AC power cords for MX10008 routers are intended for use with these routers
only. Do not use the cord for another product.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
CAUTION: Power cords must not block access to router components. We recommend
that you route all AC power cord cables through the power cord tray provided with the
router.
WARNING: The router is installed in a restricted-access location. It has a separate
protective earthing terminal on the chassis that must be permanently connected to earth
ground to adequately ground the chassis and protect the operator from electrical hazards.
109
To Next Page
Loading...
