Figure 7: Fan Tray JNP10008-FAN
Figure 8: Fan Tray Controller JNP10008-FAN-CTRL
MX10008 Power Supplies
Power supplies for the MX10008 router are fully redundant, load-sharing, and hot-removable and
hot-insertable FRUs. Each MX10008 router with a base configuration has three power supplies; redundant
configurations hold a maximum of six AC, high-voltage alternating current (HVAC), DC, or high-voltage
direct current (HVDC) power supplies. Each power supply has an internal fan for cooling. See
Figure 9 on page 29 through Figure 12 on page 30.
CAUTION: Do not mix power supply models in the same chassis in a running environment.
DC and HVDC can coexist in the same chassis during the hot swap of DC for HVDC.
28
To Next Page
Loading...
