Figure 77: Removing Fan Tray JNP10008-FAN2 from an MX10008
4. Tilt the top of the fan tray forward.
CAUTION: See the heat symbol on the fan tray. The fan handle and its
surfaces including the power supply handles may be hot. Wear proper protective,
heat-resistant gloves while removing the fan tray.
5. Using both hands, lift the fan tray out of the slot and rest it on a flat surface with the handles to the
side.
CAUTION: Fan trays must be replaced within the duration mentioned in Table 56 on
page 179.
182
To Next Page
Loading...
