•
Ensure you understand how to prevent ESD damage. See “Prevention of Electrostatic Discharge Damage”
on page 343.
•
If the AC power source outlets have a power switch, set them to the off (O) position.
Ensure that you have the following parts and tools available to install an AC power supply:
•
Electrostatic discharge (ESD) grounding strap
•
Phillips (+) screwdriver, number 1
•
Power cords appropriate for your geographical location. See “MX10000 Power Cables Specifications”
on page 107.
•
Power cord retainer clips
To install a JNP10K-PWR-AC power supply in an MX10008 or an MX10016:
197
To Next Page
Loading...
