$SSHQGL[%&RQILJXUDWLRQIRU&RPPRQ&ULWHULD($/
% 1HW6FUHHQ
The event log shows the following events:
Log setting is modified to {enable|disable} level-name
level by admin name
where level-name is the same as the level-name in the issued command and name is the
person making the change.
The NetScreen device logs an event each time an audit log is reviewed. The event log will
show the following events:
Alarm log was reviewed by admin name
Traffic log was reviewed by admin name
Asset recovery log was reviewed by admin name
Self log was reviewed by admin name
Event log was reviewed by admin name
where name is the person making the change.
To Next Page
Loading...
