Chapter 2 Installing the Device
6 User’s Guide
DESKTOP INSTALLATION GUIDELINES
Observing the following precautions can prevent injuries, equipment failures and
shutdowns.
• Never assume that the power cord is disconnected from a power source. Always
check first.
• Room temperature might not be sufficient to keep equipment at acceptable
temperatures without an additional circulation system. Ensure that the room in
which you operate the device has adequate air circulation.
• Do not work alone if potentially hazardous conditions exist.
• Look carefully for possible hazards in your work area, such as moist floors,
ungrounded power extension cables, frayed power cords, and missing safety
grounds.
CONNECTING THE POWER
To connect the power to the NetScreen-5XP device:
1. Plug the DC connector end of the power cable into the DC power receptacle on
the back of the system.
2. Plug the AC adapter end of the power cable into an AC power source.
Warning: To prevent abuse and intrusion by unauthorized personnel, it is extremely
important to install the NetScreen device in a secure environment.
Important: We recommend using a surge protector for the power connection.
To Next Page
Loading...
