Juniper PTX10008 - Software

Figure 13: JNP10K-PWR-DC2 Power Supply
g100595
Table 3 on page 34 provides an overview of the differences among the power supplies.
Table 3: Power Supply Overview
Power BusWattageInput TypePower Supply Model
Standard2700 WAC onlyJNP10K-PWR AC
Standard or enhanced5000 W, single feed; 5500 W,
dual feed
AC, HVAC, or HVDCJNP10K-PWR-AC2
Standard2500 WDC onlyJNP10K-PWR DC
Standard or enhanced2750 W, single feed; 5500 W,
dual feed
DC onlyJNP10K-PWR-DC2
Software
The Juniper Networks PTX10000 line of Packet Transport Routers run Junos OS, which provides Layer 3
routing services. The same Junos OS code base that runs on the PTX10000 line of routers also runs on all
Juniper Networks EX Series Ethernet Switches, M Series Multiservice Edge Routers, MX Series 5G universal
Routing Platforms, and SRX Series Services Gateways.
SEE ALSO
PTX10008 Cooling System and Airflow | 46
PTX10008 Chassis Physical Specifications | 159
PTX10K-LC1101 Line Card | 91
34