Table 5: CLI Equivalents of Terms Used in Documentation for PTX10000 Routers
Additional Information
Item In
DocumentationValue (CLI)Description (CLI)
Hardware
Item (CLI)
“PTX10008 Chassis Physical
Specifications” on page 159 and
“PTX10016 Chassis Physical
Specifications” on page 161
Router chassis–PTX10008
PTX10016
Chassis
“PTX10000 Routing and Control
Board Description” on page 78
Routing and
Control Board
n is a value in the range
of 0–1.
Multiple line items
appear in the CLI if more
than one RCB is installed
in the chassis.
CB (n)Routing and
Control
Board
Understanding Interface Naming
Conventions
Line card (The
router does
not have actual
FPCs—the line
cards are the
FPC
equivalents on
the router.)
n is a value in the range
of 0–7 for the
PTX10008 and 0–15 for
the PTX10016. The
value corresponds to the
line card slot number in
which the line card is
installed.
Abbreviated name of
the Flexible PIC
Concentrator (FPC)
On PTX10008, and
PTX10016, an FPC
is equivalent to a
line card.
FPC (n)
“PTX10000 Optical Transceiver
and Cable Support” on page 184
Optical
transceivers
n is a value equivalent to
the number of the port
in which the transceiver
is installed.
Abbreviated name of
the transceiver
Xcvr (n)
One of the following:
•
JNP10K-PWR-AC Power
Supply on page 61
•
JNP10K-PWR-AC2 Power
Supply on page 64
•
JNP10K-PWR-DC Power
Supply on page 65
•
JNP10K-PWR-DC2 Power
Supply on page 68
AC, DC,
HVAC, or
HVDC power
supply
n is a value in the range
of 0–5. The value
corresponds to the
power supply slot
number.
Abbreviation for
power supply unit
One of the
following:
•
JNP10K-PWR-AC
•
JNP10K-PWR-AC2
•
JNP10K-PWR-DC
•
JNP10K-PWR-DC2
PSU (n)
38
To Next Page
Loading...
