To pack and ship PTX10000 components:
1. Place individual FRUs in antistatic bags.
2. Use the original packing materials if they are available. If the original packing materials are not available,
ensure the component is adequately packed to prevent damage during transit. The packing material
you use must be able to support the weight of the component.
3. Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
4. Close the top of the cardboard shipping box and seal it with packing tape.
5. Write the RMA number on the exterior of the box to ensure proper tracking.
RELATED DOCUMENTATION
PTX10008 Hardware Overview | 23
PTX10016 Packet Transport Router Description
Packing a PTX10000 or Component for Shipping | 388
394
To Next Page
Loading...
