EasyManua.ls Logo

Juniper PTX10008 - Step 8-Perform the Initial Configuration

Juniper PTX10008
479 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 7: Status Panel LEDs in a PTX10000
DescriptionStateColorName
All of the power supplies are online and
operating normally.
On steadilyGreenPower supplies
One or more of the power supplies has an
error.
BlinkingYellow
None of the power supplies is receiving
power.
OffNone
The fans and the fan tray controllers are
online and operating normally.
On steadilyGreenFans
There is an error in a fan or in one of the
fan tray controllers.
BlinkingYellow
The fan tray controllers and fan trays are
not receiving power.
OffNone
At least one installed Switch Interface
Board (SIB) is online.
On steadilyGreenSIBs
There is a hardware error in one or more
SIBs.
BlinkingYellow
All the SIBs are offline.OffNone
At least one installed line card is online.On steadilyGreenLine cards
There is a hardware error in one or more
line cards.
BlinkingYellow
All the line cards are offline.OffNone
All installed RCBs are online.On steadilyGreenRouting and Control Boards
(RCBs)
One or more RCBs has an error condition.BlinkingYellow
The installed RCBs are offline.OffNone
43

Table of Contents

Other manuals for Juniper PTX10008

Related product manuals