EN 27
P
L
A
Y
OFF
View Mode Selection
The Standard View mode displays a colour image on the LCD monitor, while the Quick View mode displays
a black-and-white image, but updates it more quickly to show the actual motion of the subject more
faithfully.
1
Make sure that the Power Dial is set to “
M
”, “
A
” or “ ”, then press the DISPLAY Button.
•Each press of the DISPLAY Button switches the screen as shown below.
Standard View mode
(colour display)
Quick View mode
(monochrome display)
Standard View with
Information Display
mode (colour display)
Standard View mode
A colour image is displayed on the LCD monitor
and is updated about 4 times a second. This mode
is suitable for shooting stationary subjects.
Quick View mode
A black-and-white image is displayed on the LCD
monitor and is updated about 15 times a second.
This mode is suitable for shooting moving subjects.
• The image is stored in colour.
• The on-screen display is not available.
• When the shutter speed is set to 1/6 sec. or 1/13
sec., the Quick View mode is not available.
Power Dial
Lock Button
DISPLAY Button
To Next Page
Loading...
Need help?
General
