EN 29
P
L
A
Y
OFF
CAMERA MENU
CAMERA
P I CTURE MODE
SYSTEM
EX I T
SYSTEM
POWER SAVE
FLASH ADJ .
EX I T
DATE / T IME
FLASH ADJ .
+2
EX I T
Flash Adjustment
If an image shot with the flash is too dark or too bright, adjust the flash intensity as described below.
1
Turn the Power Dial, while pressing its Lock
Button, to “
M
” or “ ” and push the MENU
Jog Dial.
•The CAMERA MENU Screen appears.
2
Rotate the MENU Jog Dial to select “SYSTEM”
and push it.
•The SYSTEM Setup Screen appears.
3
Rotate the MENU Jog Dial to select “FLASH
ADJ.” and push it.
•The FLASH ADJ. (Adjustment) Screen
appears.
Lock Button
Power Dial
MENU Jog Dial
SYSTEM Setup Screen FLASH ADJ. (Adjustment) ScreenCAMERA MENU Screen
LCD monitor
4
Rotate the MENU Jog Dial to select the flash
intensity and push it.
•Select from “0”, “–1”, “–2”, “+1” and “+2”.
To brighten the flash (+1, +2) . . .
Rotate the MENU Jog Dial downward.
To darken the flash (–1, –2) . . .
Rotate the MENU Jog Dial upward.
5
Push the MENU Jog Dial twice.
•The flash adjustment value is entered and the
shooting screen reappears.
NOTES:
●
Aim the flash at the subject.
●
Even when the flash intensity is increased, the
subject may not be properly lit, depending on the
shooting conditions.
To Next Page
Loading...
Need help?
General
