56 EN
CONTROLS, CONNECTORS AND INDICATORS
(cont.)
1 EJECT Button ............................ Z pg. 44
Press to eject the optional Compact Flash
card.
2 Tripod Mounting Socket
When attaching a tripod, insert the
threaded section of the tripod in this hole
and turn to secure. Use only tripods not
equipped with a stud that prevents the
camera from rotating.
3 Hand Strap Eyelet ....................... Z pg. 8
Thread the provided hand strap through
this eyelet.
4 Compact Flash Card Slot ........... Z pg. 44
Insert an optional Compact Flash card.
5 Reset Switch
Allows you to reset the camera to its
factory presets. First, remove the power
supply (AC power adapter, batteries, etc.),
then insert a pin or similar object into this
hole.
Bottom View
12
5
34
To Next Page
Loading...
Need help?
General
