Bluetooth Control
40
Ñ Receive a call
1 Touch
[ ]
to answer a phone call or
[ ]
to reject an incoming call.
NOTE
• While monitoring the view camera, this screen
does not appear even if a call comes in. To
display this screen, return the shift knob of car to
the driver position.
To end call
1 While talking, touch [ ].
Ñ Operations during a call
● Adjust the receiver volume
Press the [S] or [R] button.
● Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys on
the screen.
● Switching the speaking voice output
Touching [
]/ [ ] each time switches the
speaking voice output between cell-phone and
speaker.
● Call-waiting
When you receive a call while talking on another
call, you can answer the newly received call by
touching
[
]
. The current call is on hold.
Each time you touch
[
]
, the caller will change.
When you touch [
], the current call will end
and switch to the call in hold.
To Next Page
Loading...
