*1 “W” indicates that the main unit is white in color. “B” indicates that the main unit is black in color.
*2 D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
*3
D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*4 During 3D playback, the display resolution is 4096 x 2160 pixels.
*5 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input
terminal may not be displayed in some cases due to changes in the HDCP specifications.
*6 Exclusively for firmware update.
*7 The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
*8 “During standby” refers to Eco Mode standby (P. 86).
0
Design and specifications are subject to change without prior notice.
0
Please
note
that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product.
This unit has acquired the certification of the “HDR10+” standard set by HDR10 +
Technologies, LLC.
Tone mapping
is optimally performed for each scene according to the dynamic metadata to
faithfully reproduce HDR video images for viewing according to the intentions of the video
producer.
HDR10+
™
logo is a trademark of HDR10+ Technologies, LLC.
This unit is isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.
For more details, please refer to the isf website.
http://www.imagingscience.com/
About Trademarks and Copyrights
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
108
Others
To Next Page
Loading...
Need help?
General
