Symbols used in this manual
x indicates a function that is supported by DLA-NZ9.
y indicates a function that is supported by DLA-NZ8.
z indicates a function that is supported by DLA-NZ7.
4 indicates a function that is supported by DLA-NP5.
5 indicates a function that is supported by DLA-RS4100.
6 indicates a function that is supported by DLA-RS3100.
7 indicates a function that is supported by DLA-RS2100.
8 indicates a function that is supported by DLA-RS1100.
Items not marked with any of the above symbols are supported by all models.
The illustrations of the projector unit used in this manual are those of DLA-NZ9. The appearance of the projector of
other models may differ slightly.
18
Getting Started
To Next Page
Loading...
