Collaboration with Panasonic UHD BD Player DP-UB9000
Selecting one of two special projector color profiles from the HDR Display Type of the DP-UB9000 enhances
dimensionality and improves gradation accuracy by tone mapping HDR video to match the JVC projector display
characteristics.
Step 1:
Using Panasonic DP-UB9000: Select “High Luminance Projector” or “Basic Luminance Projector” from HDR Display
Type Setting.
Step 2:
Using Panasonic DP-UB9000: Set HDR Optimizer “On” from OSD menu.
Step 3:
Using JVC Projector: Set “Picture Mode” as follows.
1
Set “Picture Mode” to “Pana_PQ” (P. 39)
2
Set “Color Profile” (P. 41) manually based on the following chart
Projector Color Profile
DP-UB9000
HDR Display Type
Effects on the Video Image
Pana_PQ_HL High Luminance Projector Prioritizes highest image brightness with good color.
Pana_PQ_BL Basic Luminance Projector Prioritizes best color reproduction with slightly reduced
brightness.
* The gamma settings for HDR are included in the color profile. Please configure the projector according to the above.
3
Configure “Color Temp.” to “6500K” (P. 67) and “Tone Mapping” to “Pana_PQ”
(P. 54)
MEMO
0
To watch
HDR10 content in the preconfigured “Pana_PQ” picture mode, it is recommended that you configure “Input
Signal”"“Auto Pic.Mode Select”"“HDR10” to “Pana_PQ”. (“Auto Pic.Mode Select”P. 75)
53
Adjust/Set
To Next Page
Loading...
