Adjusting Brightness
You can adjust the brightness to your preferred level.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
.
1
Select the Manual recording mode.
.
0
If the mode is P Intelligent Auto, press the i.AUTO 2 times to switch.
The mode changes between Intelligent Auto and Manual with every
press.
2
Press MENU.
.
3
Select “MANUAL SETTING” and press OK.
.
4
Select “BRIGHTNESS ADJUST” and press OK.
.
5
Select “MANUAL” and press OK.
.
6
Select the brightness value with the UP/< and DOWN/> buttons.
.
0
Compensation range during recording: -2.0 to +2.0
0
Press UP/< to increase the brightness.
0
Press DOWN/> to decrease the brightness.
7
Press OK to confirm.
.
Recording
26
To Next Page
Loading...
