Dubbing Files to a Disc by Connecting to a DVD
Recorder
You can dub videos in standard quality by connecting to a DVD recorder.
0
Refer also to the instruction manuals of the TV and DVD recorder.
1
Remove the AC adapter and battery pack from this unit.
2
Open the LCD monitor.
.
3
Connect to a DVD recorder.
.
A Connect using the provided AV cable.
B Connect the AC adapter to this unit.
0
This unit powers on automatically when the AC adapter is connected.
0
Be sure to use the supplied AC adapter.
4
Select the playback mode.
.
5
Prepare the TV/DVD recorder for recording.
0
Switch to a compatible external input.
0
Insert a disc (DVD-R, etc.) into the DVD recorder.
6
Prepare this unit for playback.
0
Set “VIDEO OUTPUT” in the “CONNECTION SETTINGS” menu to
the aspect ratio (“4:3” or “16:9”) of the connecting TV.
“ VIDEO OUTPUT ” (A p. 65)
0
To include the date and time during dubbing, set “DISPLAY ON TV”
in the “CONNECTION SETTINGS” menu to “ON”.
Set “DISPLAY DATE/TIME” in the playback menu to “ON”.
“ DISPLAY ON TV ” (A p. 65)
“ DISPLAY DATE/TIME ” (A p. 61)
7
Start recording.
0
Start playback on this unit and press the record button on the
recorder.
“Playing Back Videos” (A p. 35)
0
After playback is complete, stop the recording.
Memo :
0
AV cable (P/N: QAM1322-001)
Wiring specifications (for video/audio) of the 4-pole mini plug are described
in the following.
For purchasing, consult your nearest JVC service center.
.
Caution :
0
File copying by connecting this unit to a DVD writer is not supported.
Copying
46
To Next Page
Loading...
