43
EXTERNAL DEVICES
Using the Bluetooth audio player
☞ page 51
Sound mode
(
☞ page 51)
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
Bluetooth icon
lights up when
the adapter is
connected.
~ Press [SOURCE], then press [Bluetooth
AUDIO].
(☞ page 9)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ Start playback.
• See page 37 for connecting a new device.
• See pages 38 for connecting/disconnecting a
registered device.
• See page 38 for deleting a registered device.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit our JVC web site.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
: Start and pause playback.
: Reverse/forward skip.
: Adjust the volume.
[3 / 8] [7] Start and pause playback
[
4 ¢] Reverse/forward search
[
5 ∞] Select the registered device
(“New Device” appears when a new device can be
registered.)
*
3
*
2
*
1
*
1
When a cellular phone with audio function is connected, appears.
*
2
Indicates the button pressed. It may be different from the operation status.
*
3
You cannot select “New Device” when a Bluetooth audio player is connected.
EN37-50_KW-AVX900A_f.indd 43EN37-50_KW-AVX900A_f.indd 43 07.3.13 11:40:20 AM07.3.13 11:40:20 AM
To Next Page
Loading...
