48
Using other external components
AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN plugs.
~ Press [SOURCE], then press [AV-IN]. (☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Turn on the connected component and start playing the source.
To display the operation buttons (☞ page 17) while watching the playback picture
• If no operations are done for about 5 seconds, the operation buttons disappear.
• [KEY] does not work when the source is “AV-IN.”
☞ page 51
• You can easily access to <Aspect>
setting menu by pressing [SHORT CUT]
on the touch panel, then...
Assigned title (☞ page 52)
Sound mode (
☞ page 51)
: Buttons on the touch panel. In the explanation, they are indicated inside [ ].
These buttons also work when they are not shown on the touch panel (while watching pictures on the
screen).
Touch the screen (center portion).
Touch the screen (center portion).
EN37-50_KW-AVX900A_f.indd 48EN37-50_KW-AVX900A_f.indd 48 07.3.13 11:40:26 AM07.3.13 11:40:26 AM
To Next Page
Loading...
