39
5. PREPARATIONS
Unloading the Cassette
1.
Set the POWER switch to ON.
2.
Slide the OPEN knob to the side to open the cassette cover.
3.
Press the EJECT button.
Tape ejection starts.
MEMO:
It takes a few seconds before the cassette is ejected after
the EJECT button is pressed.
Do not close the cassette cover during the eject operation.
4.
Take out the videocassette.
5.
Close the cassette cover.
CAUTION:
● Do not leave the unit for a long period with the cassette
cover open. Dirt or other foreign objects may enter the
VCR section and cause malfunction.
● Do not touch the cassette insertion slot or cassette during
the eject operation. This could result in damage.
Cassette
cover
Cassette cover
OPEN knob
EJECT button
To Next Page
Loading...
Need help?
General
