JVC GY-HM600U - Loading a Setup File

6
Select [Store] and press the Set button (R).
.
6
5
7
Save the file.
0
A confirmation screen appears when you
choose to overwrite.
Select [Overwrite] on the confirmation
screen, and press the Set button (R). Saving
starts, and “Storing...” appears on the
screen.
.
7
0
Saving starts, and “Storing...” appears on the
screen when the file is newly saved.
.
8
Saving is complete.
After saving of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
Loading a Setup File
1
Display the [Setup File] menu.
Select [Main Menu] B [System] B [Setup File]
and press the Set button (R).
(A P104 [ Setup File ] )
2
Select [Load File] and press the Set button (R).
3
Select [Scene File] or [Picture File], and press
the Set button (R).
The existing files are displayed.
4
Select the file to load using the cross-shaped
button (JK), and press the Set button (R).
.
4
Memo :
0
When the write-protect switch of the inserted SD
card is set, a z mark appears beside the SD
card icon. Setup files can be loaded from an SD
card even if the write-protect switch is set.
0
Setup files that are completely incompatible will
not be displayed.
(A P121 [Configuring Setup Files] )
5
Select [Load] on the confirmation screen, and
press the Set button (R).
Loading starts, and “Loading...” appears on the
screen.
.
5
6
Loading is complete.
After loading of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
122
Camera Features