JVC GY-HM600U - Focus Operation

Using Zoom Ring at the Lens Section
1
Set the [ZOOM SERVO/MANUAL] switch to
“MANUAL”.
You can adjust the preferred angle of view by
turning the zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1
Assign the “Preset Zoom1”, “Preset Zoom2”, or
“Preset Zoom3” function to any of the user
buttons.
(A P36 [Assigning Functions to User Buttons] )
(A P91 [USER1 - USER7, LCD KEY▲/LCD
KEY▶/LCD KEY▼/LCD KEY◀] )
2
Save the current zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1”, “Preset Zoom2”, or “Preset
Zoom3” function for more than 1 second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1”, “Preset Zoom2”, or “Preset
Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
To recall the stored zoom position, set the
[ZOOM SERVO/MANUAL] switch to “SERVO”.
0
The zoom speed to the zoom position can be set
with [Main Menu] B [Camera Function] B
[Preset Zoom Speed].
(A P92 [ Preset Zoom Speed ] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
Focus Operation
Adjusting Focus Manually
.
FOCUS
MANU
PUSH AUTO
FOCUS ASSIST/1
TIME CODE
AUTO
1
Set the [FOCUS AUTO/MANU/∞] switch to
“MANU”.
The manual focus icon d appears on the
screen.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 24 , 2012
00: 00:00.00
4030 20
10
0
5 . 6 f t
Memo :
0
If [Main Menu] B [LCD/VF] B [Display
Settings] B [Focus] is set to “Off”, the d icon will
not appear.
(A P99 [ Focus ] )
2
Turn the focus ring to adjust the focus.
Memo :
0
Using the Focus Assist function makes it easier
to focus.
(A P46 [Focus Assist Function] )
45
Shooting