JVC GY-HM600U Instructions

R
Focus Assist
0
“FOCUS
” is displayed when auto focus is
activated.
0
When ACCU-Focus is enabled, “ACCU-
FOCUS
” blinks for about 10 seconds while
Focus Assist starts up, after which the
“FOCUS” indicator lights up.
0
If recording starts while [ACCU-Focus
] is
active, [ACCU-Focus] will be forcibly
deactivated.
(A P
104 [ Focus Assist ] )
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
S
Luminance Information
Displayed when the Spot Meter function is
activated.
(A P70 [Setting Spot Meter] )
MAX : Maximum luminance
MIN : Minimum luminance
T
Date/Time Display
Displays the current date and time.
Memo :
0
The date/time display style can be specified in
[Main
Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
(A P
107 [ Date Style ] )
(A P107 [ Time Style ] )
0
This item is not displayed when
[Main Menu] B
[LCD/VF] B [Display Settings] B [Date/Time] is
set to “Off”.
(A P
107 [ Date/Time ] )
0
When [
Main Menu] B [System] B [Record Set]
B [Time Stamp] is set to “On”, this item is not
displayed.
(A P114
[ Time Stamp ] )
U
Zoom Display
0
Displays the zoom position. (Zoom bar or
value)
0
The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0
The
value will always be displayed. (0 to 99)
Memo :
0
You can specify the display method (Number/
Bar)
and whether to turn off the display in [LCD/
VF] B [Display Settings] B “Zoom”.
This item will not be displayed when “Off” is
selected.
(A
P106 [ Zoom ] )
0
Displayed in the Display 0 screen only when
there is a change.
V
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second: frame) or user’s bit data.
0
Example of time code display:
.
00:00:00:00
※
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
0
Example of user’s bit display:
.
FF EE DD 20
122
Display/Status Screen

JVC GY-HM600U Specifications

General

Brand	JVC
Model	GY-HM600U
Category	Camcorder
Language	English