JVC GY-HM600U - Configuring Setup Files; Saving Setup Files

Configuring Setup Files
The menu settings can be stored on the camera
recorder or an SD card by saving them as a setup
file.
Loading a saved setup file enables you to
reproduce the appropriate setup state speedily.
Two types of setup files are available.
o Scene file:
File that contains all menu settings, ranging from
video format settings to image creation settings
such as device settings and shooting conditions,
as well as the contents of the
[Favorites Menu].
o Picture file:
File that contains image creation settings in
accordance to the shooting conditions ([Camera
Process] menu items).
(A P98 [Camera Process Menu] )
Memo :
0
Make use of the
[Setup File] menu to save or
load a setup file.
0
The following operations can be performed on
the [Setup File
] menu.
0
[Saving Setup Files] P
129
0
[Loading a Setup File] P 130
0
[Deleting Setup Files] P 131
Number of Storable Setup Files
Camera recorder : [CAM1] to [CAM4]
SD slot A
: [ W 1 ] to [ W 8 ]
SD slot B : [ Y 1 ] to [ Y 8 ]
Compatibility
o Scene file
0
Only scene files of the GY-HM600 and
GY-HM650 series can be loaded.
0
When the scene files saved using GY-HM650
are loaded, the functions that only exist on
GY-HM650 are ignored.
o Picture file
Only
picture files of the GY-HM600 and GY-HM650
series can be loaded.
Saving Setup Files
1
Display the [Setup File] menu.
Select [Main Menu] B [
System] B [Setup File]
and press the Set button (R).
(A P110 [ Setup File ] )
2
Select [Store File] and press the Set button
(R).
3
Select [Scene File] or [Picture File], and
press the Set button (R).
The existing files are displayed.
4
Select the file to be newly saved (or
overwritten) using the cross-shaped
button (JK), and press the Set button (R).
.
4
Memo :
0
Files cannot be written in the following cases.
(Displayed in gray, selection disabled)
0
When the inserted SD card is not supported or
not formatted. (File name appears as “---”.)
0
When a write-protected SD card is inserted
(a z mark appears beside the SD card icon).
5
Name the file.
0
Enter the subname using the software
keyboard.
(A P92 [Text Input with Software Keyboard] )
0
You can enter up to 8 characters for the
[Store File]/[Picture File] subname.
Memo :
0
When overwriting an existing file, the subname
of the existing file is displayed.
0
Select
[Cancel] and press the Set button (R), or
press the [CANCEL] button to return to the
previous screen.
129
Camera Features