Opening/Closing the Lens Cover
Use the lens cover open/close switch to open or
close the lens cover.
Before shooting, open the lens cover.
When
this camera recorder is not in use, close the
lens cover to protect the lens.
.
Caution :
0
Do not press against the lens cover with force.
Doing so may damage the lens or the cover.
Attaching/Detaching the Hood
Attaching the Hood
Align the markings on the camera recorder and
hood;
turn the hood in the direction of the arrow until
it is locked.
.
Detaching the Hood
0
Remove the hood when attaching a filter,
teleconverter
or wide converter to the front of the
lens.
0
While pressing the hood release button, turn the
hood in the anti-clockwise direction to remove it.
.
Power Supply
To use this camera recorder, you can attach a
battery pack or connect an AC adapter to it.
(A P26 [Using a Battery Pack] )
(A P28 [Using AC Power (DC IN Power)] )
Caution :
0
Set the
[POWER ON/OFF(CHG)] switch to
“OFF(CHG)” before changing the power supply
that operates this camera recorder.
Using a Battery Pack
Charging the Battery
Charge the battery immediately after purchase or
when the battery power is running low.
*
The battery is not charged when purchased.
.
1
2
3
4
4
POWER
/CHG
MODE
POWER
ON
OFF
(CHG)
26
Preparations
To Next Page
Loading...
Need help?
General
