Why can't I initialize (format) the SD card in my JVC GY-HM620E?
If you cannot initialize (format) the SD card in your JVC Camcorder, check if the write-protect switch on the SD card is turned on. If it is, turn it off.
Why is there no sound during JVC Camcorder playback?
If there is no sound during JVC Camcorder playback, it might be because the clip was recorded in Variable Frame Rec mode.
What to do if the camera image is not output on the LCD monitor and viewfinder screen of my JVC GY-HM620E Camcorder?
If the camera image is not output on the LCD monitor and viewfinder screen of your JVC Camcorder, ensure that the camera recorder is set to the Camera mode by using the [MODE] selection button.
What to do if JVC GY-HM620E Camcorder SD card cannot be initialized?
If your JVC Camcorder cannot initialize (format) the SD card, check if the write-protect switch on the SD card is turned on. Ensure that the write-protect switch is turned off.
Why does battery alarm appear on JVC GY-HM620E Camcorder even after loading a charged battery?
If a battery alarm appears on your JVC Camcorder even after loading a charged battery, the battery might be too old.
Why is the actual recording time shorter than estimated on my JVC GY-HM620E?
The recordable time on your JVC Camcorder may be shorter than the estimated time depending on the shooting conditions or the subject.
How to connect JVC Camcorder to wireless LAN?
To connect your JVC Camcorder to a wireless LAN, check the connection mode and settings, specifically the [SSID] and [Passphrase] if you're not using WPS. If you encounter a message about the Passphrase during browser setup, double-check and adjust the [Passphrase] again.
Why do images on my JVC GY-HM620E Camcorder LCD monitor appear dark or blurred?
If the images on your JVC Camcorder's LCD monitor and viewfinder screen appear dark or blurred, try these adjustments: Readjust the brightness of the LCD monitor and viewfinder. Check if the [ND FILTER] switch is set to “1/64”. Ensure the iris is not closed and the shutter speed setting is not too high. Also, adjust the contour for the LCD monitor and the viewfinder screen using the [PEAKING +/-] button if the amount of peaking is too little.
Why is there no sound during playback on my JVC GY-HM620E?
If you are experiencing no sound during playback on your JVC Camcorder, the clip may have been recorded in Variable Frame Rec mode.
How to fix JVC GY-HM620E when power does not turn on?
If your JVC Camcorder isn't powering on, ensure the AC adapter is properly connected and the battery is adequately charged. Also, if you've just turned it off, wait at least 5 seconds before attempting to power it on again.
To Next Page
General
