JVC KW-V640BT - Page 26

24 ENGLISH
2 Determine usage as a hands free device
(
1), then touch [Close] (2).
[Hands Free1]/
[Hands Free2]
Select hands free number to
use as the hands free device.
[No Connection.] Select this when you do not
want to use as the hands free
device.
3 When your Bluetooth device is compatible
with A2DP or SPP: Determine usage as
an audio player or a device with Apps
installed.
[Yes] Select to use the device as an audio player.
[No] Select this when you do not want to use
the Bluetooth device as an audio player.
Bluetooth®Bluetooth®
4
When your Bluetooth device is compatible
with PBAP: Select whether to transfer the
phonebook of your Bluetooth device to
the unit or not.
[Yes] Select to transfer the phonebook from
your Bluetooth device.
[No] Select this when you do not want to
transfer the phonebook.
Registering a Bluetooth device
1 Search for the unit (“KW-V6 or KW-M5”)
from your Bluetooth device and operate
the device to register.
For a Bluetooth device compatible with SSP
(Bluetooth 2.1):
Confirm the request both on the device and the
unit.
On the device:
On the unit:
• Touch [No] to reject the request.
For a Bluetooth device compatible with
Bluetooth 2.0:
Select the unit (“KW-V6” or “KW-M5”) on your
Bluetooth device.
• If a PIN code is required, enter the PIN code
shown on the screen (initial: “0000”).
To change PIN code, see page 25.
ENKW-V2018TCM.indb24ENKW-V2018TCM.indb24 2018/01/1615:052018/01/1615:05