JVC KW-V640BT - Page 27

25ENGLISH
Bluetooth®Bluetooth®
Changing the PIN code
1 Display the <Change PIN Code> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [PIN
Code].
2 Enter the PIN code (1), then confirm the
entry (
2).
• To clear the last entry, touch [BS].
3 Select the usage of the device (1), then
touch [Close] (
2).
Each time you touch the selection, the usage is
selected (“ ” appears) or deselected (“ ”
disappears). Select to connect and deselect to
disconnect the device.
[TEL (HFP)1]/
[TEL (HFP)2]
Select to use as the hands free
device.
[Audio (A2DP)/
App (SPP)]
Select to use as the audio
player or device with Apps
installed.
To delete the registered Bluetooth device: Touch
[Delete] in step 2, select devices to delete, then touch
[Delete]. A confirmation message appears. Touch
[Yes].
• To select all devices, touch [
All].
• To deselect all selected devices, touch [ All].
Connecting/disconnecting a registered
Bluetooth device
1 Display the <Select Device> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [Select
Device].
2 Select the device you want to connect/
disconnect.
The icons beside the registered device indicate the
following:
•
/
: Connected as a mobile phone.
•
: Connected as an audio player.
ENKW-V2018TCM.indb25ENKW-V2018TCM.indb25 2018/01/1615:052018/01/1615:05