Disc
20
DVD Setup
You can set up the DVD playback functions.
1
Touch illustrated area during playback.
2
Touch on the left side of the screen.
Touch [SETUP].
DVD SETUP screen appears.
3
Set each item as follows.
■ [
Menu Language] / [Subtitle Language]
/ [Audio Language]
See Language setup (P.20).
■ Dynamic Range Control
Sets the dynamic range.
Wide: The dynamic range is wide.
Normal: The dynamic range is normal.
Dialog (Default): Makes the total sound
volume larger than other modes. This is
effective only when you are using Dolby
Digital software.
■ Screen Ratio
Sets the screen display mode.
16:9 (Default): Displays wide pictures.
4:3 LB: Displays wide pictures in the Letter
Box format (having black stripes at the top
and bottom of screen).
4:3 PS: Displays wide pictures in the Pan &
Scan format (showing pictures cut at the
right and left ends).
Ñ Language setup
This setting is for the language used in the
menu, subtitle, and voice.
1
Touch the desired item;
[Menu Language], [Subtitle Language],
[Audio Language].
Language Set screen appears.
2
Select a language.
For language code, refer to DVD Language
Codes (P.90).
Sets the entered language and returns to
the DVD Setting screen.
NOTE
• To set the DVD’s original language for audio
language, touch [Original].
!B5A-1733-00_17KWV-K_En.indb 20 2016/12/28 11:24
To Next Page
Loading...
