JVC KW-V830BT - Change the PIN code; Change the device name; Playing Bluetooth Audio Device

Bluetooth Control
54
Ñ Change the PIN code
1
Touch [PIN Code] in the Bluetooth SETUP
screen.
 PIN Code Set screen appears.
2
Input the PIN code.
3
Touch [SET].
Ñ Change the device name
1
Touch [Device Name] in the Bluetooth
SETUP screen.
 Change Device Name screen appears.
2
Input the device name.
3
Touch [Enter].
Playing Bluetooth Audio
Device
Most function can be controlled from the
source control screen.
To enter Bluetooth source, touch [BT Audio]
icon in the source selection screen. (P.11)
Ñ Bluetooth basic operation
Control screen
3
4
5
2
1
1
Device name/ [ ] / [ ]
• Connected device name.
• [
] : Repeats the current track/folder. Each
time you touch the key, repeat mode switches
in the following sequence; File repeat ( ),
Folder repeat ( ), All songs repeat ( ),
Repeat off ( )
• [
] : Randomly plays all tracks in current
folder. Each time you touch the key, random
mode switches in the following sequence;
Folder random ( ), All random ( ),
Random off ( )
2
Information display *
Displays the name of the track information.
3
[Function bar *
• [1]: Searches file. See File search (P.55).
• [E] [F]: Searches the previous/next
content. Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• [D]: Plays.
• [H]: Pauses.
• [
] : Touch to attenuates/restores the sound.
!B5A-1733-00_17KWV-K_En.indb 54 2016/12/28 11:24