EasyManua.ls Logo

JVC KW-V830BT - Sound Effect

JVC KW-V830BT
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Controlling Audio
74
5
Touch [Zone Control].
Zone Control screen appears.
6
Touch [Zone Select].
7
Touch [Dual Zone].
8
Set each source as follows.
[Zone Select]
Touch [Single Zone] to turn off the dual
zone function.
[Front Source] [Rear Source]
Select the audio source for each.
[Rear VOL.]
Adjusts the rear source volume.
NOTE
When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
When the dual zone function is set to on, the
following functions are not available.
Output from the subwoofer
Subwoofer Level/ Bass Boost (P.74)
Equalizer Control/ Sound Effect/ Listening
Position (P.72, 74, 75)
Speaker Setup (P.69)
High-resolution Sound Source File Playback
NOTE
You cannot select iPod if it is connected via
Bluetooth.
If you select USB, iPod, Disc, Bluetooth audio,
Apple CarPlay or Android Auto as the Front
Source, you cannot select USB or iPod as the Rear
Source.
Sound Effect
You can set sound effects.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [ ].
HOME screen appears.
3
Touch [ ].
Source selection screen appears.
4
Touch [Audio].
Audio screen appears.
5
Touch [Sound Effect].
6
Set each item as follows.
Bass Boost
Sets the amount of bass boost among “OFF”/
“1”/ “2”/ “3”.
Loudness
Sets the amounts of boost of low and high
tones.
“OFF”, “Low”, “High
Volume Link EQ
Reduces the driving noise by raising the
bandwidth.
“OFF”, “ON”
!B5A-1733-00_17KWV-K_En.indb 74 2016/12/28 11:25

Table of Contents

Related product manuals