JVC KW-V830BT - Controlling Audio; Speaker; Xover setup

Controlling Audio
69English
Controlling Audio
You can adjust the various settings such as
audio balance or subwoofer level.
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 Source selection screen appears.
4
Touch [Audio].
See the following section for each
setting.
• Set up speaker/ X’over (P.69)
• Controlling equalizer (P.72)
• Set listening position/ DTA (P.75)
• Controlling general audio (Fader /
Balance) (P.71)
• Set volume offset (P.73)
• Performing zone control (P.73)
• Set sound effect (P.74)
Speaker/ X’over setup
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 Source selection screen appears.
4
Touch [Audio].
 Audio screen appears.
5
Touch [Speaker/Xʼover].
6
Select a car type.
You can setup the car type and speaker
network, etc.
If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each
channel) to have the highest surround
effects.
7
Touch the speaker (1) you wish to adjust
and set each item (2) as follows.
1
2
!B5A-1733-00_17KWV-K_En.indb 69 2016/12/28 11:25