JVC KW-V830BT - Connect the Bluetooth unit; To delete the registered Bluetooth unit

Bluetooth Control
53English
Ñ Connect the Bluetooth unit
1
Touch [Select Device] in the Bluetooth
SETUP screen.
2
Touch the device name you want to
connect.
 Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
3
Set each profile as follows.
■ TEL (HFP) 1, TEL (HFP) 2
The device is connected with the unit as
hands-free phone 1 or 2.
■ Audio (A2DP)/App (SPP)
Set to interwork with an application installed
in a smartphone or to use as an audio player.
4
Touch [Close].
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
To delete the registered Bluetooth unit
1
Touch [Delete].
2
Touch the device name to check.
■ [þ All]
Select all Bluetooth unit.
■ [¨ All]
Erases all check marks.
3
Touch [Delete].
 Confirmation message appears.
4
Touch [Ye s ].
!B5A-1733-00_17KWV-K_En.indb 53 2016/12/28 11:24