1. Channel
Antenna
- Press LEFT/RIGHT navigation button to select DVB-T or DVB-C.
Auto Tuning
- Press the OK or RIGHT navigation button.
- Use the navigation buttons to set the Country, Tune Type and LCN.
Note: Scan type and following items are adjustable only when “Antenna” is DVB-C.
- Then press OK to start program tuning.
ATV Manual Tuning
Scan available programs manuallly.
DTV Manual Tuning
Scan available programs manuallly.
Programme Edit
Edit a program that TV received. (delete, skip or set a favorite program).
Schedule List
Schedule a recording in DTV mode.
Recorded List
Show the list or Previously recorded programs
Signal information
This item is used to display signal details, for example: signal quality and strength.
CI information
When an available CAM (Conditional Access Module) card is connected to the CI slot, the users
can view related information or manage your CAM card.
2. Picture
Picture Mode
- Press UP/DOWN/LEFT/RIGHT navigation buttons to select an option.
Picture Mode: available options: Standard, Mild, Personal, Dynamic.
Contrast / Brightness / Colour / Tint / Sharpness: adjustable value: 0-100.
Note: Contrast, Brightness, Colour and Sharpness are adjustable only when Picture Mode is
“Personal”. Tint is adjustable only for NTSC system.
Color Temp
This item is used to adjust the optimum color temperature for suitable viewing.
Available options: Normal, Warm, Cold.
Noise Reduction
Available options: Off, Low, Medium, High
NOTE: Noise Reduction is not available when signal source is HD, such as 1080i in DTV & USB
input source.
To Next Page
Loading...
Need help?
General
