Mounting on a Wall
CAUTION:
Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
The distance between the holes is 100 x 100
mm in width and height.
Tighten the screws (M4x10mm) firmly to
prevent the TV from tilting forward. Do not
over tighten.
Secure the neck to your TV with the
provided two long screws.
Attach the neck to the stand by
inserting and snapping the tabs on
the neck into the slots in the stand.
Attach the stand to the TV using the
provided four short screws.
Place the TV upright on a stable
level surface.
To Next Page
Loading...
Need help?
General
