When selecting the signal source, the screen will display the information.
No Signal
1 _ _:_ _
TV PAL DK Mono
TV
mode
11
displayed per below.
When there is no signal from the selected source, a warning message will be
Either change the channel i n TV mode or press
Source button to change source.
4.4 Menu Option Adjustment
After you have installed the batteries into the remote control, you will
need to set some preferences on the TV, using the menu system.
The buttons for the menu option adjustment include: M enu,
, ,
,
Enter
buttons.
- Press the Menu button to open the OSD menu, then press
button to select
the pages. The pages are displayed in the following sequence (circular display):
1
2
3
4
5
PICTURE
SOUND
TIMECHANNEL
OPTION
Press the Menu button to display the menu system.
Press button to select the menu pages.
Press
,
button to select an item.
Press
, button to adjust a setting.
If you do not make a selection within 10 seconds, the menu will close automatically.
6
Press the Menu button to return or exit OSD menu.
Please note: CHANNEL is only for TV mode.
,
,
To Next Page
Loading...
Need help?
General
