JVC RD-D227B - DAB Display Modes

DAB Display Modes
Every time you press the INFO button on the remote control, the display will cycle through
the following display modes.
Station Name
Ensemble Name
Clock
Date
DLS
Programme Type
Channel Number
Frequency
Stereo/Mono
Bit Rate
Signal Strength
Station Name
When a radio station is received, the name of that station will
be displayed.
Ensemble Name
A Ensemble/multiplex is a collection of radio stations that
are bundled and transmitted on one frequency. There are
national and local multiplexes. Local ones contain stations
that are specic to that area.
DAB – unlike normal radio, groups together several radio
stations and transmits them on one frequency.
Clock
The broadcaster (Radio station) provides clock information
automatically. If the information is not available, the display
will show the incorrect time.
Date
The broadcaster (Radio station) provides date information
automatically. If the information is not available, the display
will show the incorrect date.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the
broadcaster may include with their transmissions. The
message usually includes information, such as programme
details etc.
Programme Type
This describes the “Style” or “genre” of music that is being
broadcast e.g. “Rock” or “Classical”.
Channel Number
DAB digital radio can be broadcast on a wide number of
frequencies.
Frequency
The frequency of the present station will be displayed.
Stereo/Mono
The display will show the audio mode (Stereo or Mono) of
the current station.
Bitrate
The display will show the digital audio bit rate being received.
Signal Strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar will be from
left to right.
20
RD-D227B_IB_Final190415V6.indd 20 16/04/2019 16:24