NFC Operation
Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Activate NFC on your mobile device.
2. Place the mobile device on the icon
of the unit. Your unit will switch to Bluetooth®
mode automatically. The display will show “BT READY”. The unit will enter pairing
mode. “BT” will show on display after the connection.
3. Operate your mobile device directly for playback features.
4. Place the mobile device on the icon of the unit to disconnect or disable Bluetooth®
from your mobile device.
SOURCE
VOL– VOL+
The NFC function only works with mobile devices that support NFC technology.
AUX Operation
There are AUX IN (L/R) sockets located at the rear of the unit. Analogue audio sound signals
from other sources can be connected to the unit through these sockets.
1. Connect to another audio device using the AUX IN (L/R) sockets via a RCA stereo audio
cable.
2. While in the ON mode, press the SOURCE button repeatedly on the unit or press the
AUX button on the remote control to select AUX mode.
3. Press the VOL+/VOL – button on the unit or remote control to adjust the volume to
your desired level.
4. In AUX mode, operate your audio device directly for playback features.
26
RD-D227B_IB_Final190415V6.indd 26 16/04/2019 16:24
To Next Page
Loading...
Need help?
General
