JVC RX-5022RSL

29
Cassette deck
After pressing TAPE/CDR, you can use the following buttons for
cassette deck operations:
33
33
3 : Start playback.
FF : Fast wind the tape from left to right.
REW : Fast wind the tape from right to left.
77
77
7 : Stop playback or recording.
88
88
8 : Pause playback. To release it, press
33
33
3.
REC PAUSE : Press this button to enter recording pause.
Press this button then
33
33
3 to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 8.
CD recorder
After pressing TAPE/CDR, you can use the following buttons for
CD recorder operations:
33
33
3 : Start playback.
4 : Return to the beginning of the current
(or previous) track.
¢ : Skip to the beginning of the next track.
77
77
7 : Stop playback or recording.
88
88
8 : Pause playback. To release it, press
33
33
3.
REC PAUSE : Press this button to enter recording pause.
Press this button then
33
33
3 to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 8.
Operating JVC’s Audio/Video Components
CD player
After pressing CD, you can use the following buttons for CD
operations:
33
33
3 : Start playback.
4 : Return to the beginning of the current
(or previous) track.
¢ : Skip to the beginning of the next track.
77
77
7 : Stop playback.
88
88
8 : Pause playback. To release it, press
33
33
3.
1 – 10, +10 : Select a track number directly.
• For track number 5, press 5.
• For track number 15, press +10, then 5.
• For track number 20, press +10, then 10.
CD changer
After pressing CD-DISC, you can use the following buttons for CD
changer operations:
33
33
3 : Start playback.
4 : Return to the beginning of the current
(or previous) track.
¢ : Skip to the beginning of the next track.
77
77
7 : Stop playback.
88
88
8 : Pause playback. To release it, press
33
33
3.
1 – 6, 7/P : Select the number of a disc installed in a CD
changer.
EN27-32.RX-5022RSL[B]_f 02.1.16, 5:34 PM29